Metallized 410 Stainless Steel Wire

A&A Coatings material is a high chrome stainless steel wire manufactured exclusively for combustion wire spraying. It has excellent wearing qualities and fair corrosion resistance. It is the best all-purpose steel for machine element work.

Use of this material is recommended wherever a hard coating is required, even where corrosion resistance is not necessary. It has high strength, high elongation and low shrink, with practically no tendency to crack on shafts. It has been used successfully on machine elements such as journal surfaces of all kinds, cylinder liners, pistons, valve stems, pump plungers, hydraulic rams, crankshaft bearings and many others.

Material Wire Characteristics

Typical Composition: Carbon 0.35%
Phosphorous 0.02%
Sulfur 0.02%
Manganese 0.35%
Nickel 0.5%
Chromium 13%
Silicon 0.5%
Iron Balance
Melting Point: 2600°F

Physical Properties of Coating

Surface Finish: Ground 32
Coating Macrohardness: Rc33
Density (g/cc): 6.74
Coating Weight (lb/ft2/.001″): .045
Coating Tensile Strength (PSI): 40,000
Thickness Limitation: High

Finishing

A&A Coatings combustion wire sprayed 410 Stainless Steel may be ground, or machined at low speed with carbide tools.

Request A Quote
Please complete this form and you will be contacted within the same business day.